Download
Share
Print this page
  1. Manuals
  2. Brands
  3. KTI Networks Manuals
  4. Laboratory Equipment
  5. KPOE-100
  6. Installation manual

KTI Networks KPOE-100 Installation Manual

Mid-span 802.3af poe injector
Hide thumbs

Advertisement

Quick Links

Download this manual
Mid-span 802.3af PoE Injector
Installation Guide
KPOE-100
Doc. 070521
1

Advertisement

loading

Related Manuals for KTI Networks KPOE-100

Summary of Contents for KTI Networks KPOE-100

  • Page 1 Mid-span 802.3af PoE Injector Installation Guide KPOE-100 Doc. 070521...
  • Page 2 KTI Networks Inc. reserves the right to revise this documentation and to make changes in content from time to time without obligation on the part of KTI Networks Inc. to provide notification of such revision or change. For more information, contact:: KTI Networks Inc.

  • Page 3: Fcc Notice

    The information contained in this document is subject to change without prior notice. Copyright (C) All Rights Reserved. TRADEMARKS Ethernet is a registered trademark of Xerox Corp. FCC NOTICE This device complies with Class B Part 15 the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received including the interference that may cause.
  • Page 4 Introduction The KPOE-100 is a device designed as a mid-span Power over Ethernet PSE, which is equipped with one-input and one-output RJ-45 connectors to connect directly to an Ethernet cable. It delivers power together with the Ethernet data lines over the Cat.5 cable to a PoE Powered Device such as a Wireless Access Point or a media converter located at place where no commercial outlet is available.

  • Page 5: Specifications

    Specifications Ethernet RJ-45 (IN Jack) Connector Shielded RJ-45 Connection Support Ethernet, Fast Ethernet, Gigabit Ethernet Cable Cat. 5, 5e PoE PSE RJ-45 (OUT Jack) Connector Shielded RJ-45 PSE Pin 4,5 Positive V (48VDC) PORT PSE Pin 7,8 Negative V (48VDC) PORT Cable 4-pair Cat.
  • Page 6 LED Indication POWER Power status (green) PoE power status (green) DC IN Jack Connector Power Jack Input voltage +48VDC supplied by external power adapter Input current DC 0.4A min. Environment Temperature Operating: -5 ~ 50 Storage: -20 ~ 85 Relative humidity 5% ~ 95% non-condensing Mechanical Housing...
  • Page 7 Dimension 50mm x 80mm x 21mm AC-DC48V Power Adapter Rated input voltage 100 ~ 240VAC Rated frequencies 50 ~ 60Hz Input voltage range 90 ~ 264VAC Input frequency range 47~63Hz Input AC plug IEC320 C14 plug (3-pin) Output voltage +48VDC (+/-5%) Output current DC 0.5A max.

  • Page 8: Installation

    Installation Screw mounting on a wall The case is featured two holes on the case. Screw the injector over the screw holes on a wall securely. Wall mounting The case bottom is designed with a hole for mounting the injector on a wall.
  • Page 9 Inserting DC power plug first Insert the DC cable of the power adapter to the injector DC IN jack as shown below: Applying AC power The AC-DC48V power adapter used to supply the 48VDC power for the injector can receive AC voltage within a range of +90 ~ 264VAC. It supports the commercial power available worldwide.
  • Page 10 Application Supporting PoE wireless Access Point (802.3af PD) Supporting PoE media converter (802.3af PD)