Table of Contents
Advertisement
Abbreviations
Important notes
Store this manual close to the device. If you pass on the device to third parties, you should also
pass on this manual.
Be sure to read this page carefully and note the information before you open the Server.
!
Please note the information provided in the chapter "Safety" in the Operating Manual of
the server.
Incorrect replacement of the lithium battery may lead to a risk of explosion. It is therefore
essential to observe the instructions in the chapter
battery".
The lithium battery must be replaced with an identical battery or a battery type
recommended by the manufacturer (CR2032).
Do not throw lithium batteries into the trashcan. It must be disposed of in accordance with
local regulations concerning special waste.
Connecting cables for peripherals must be adequately insulated to avoid interference.
Components can become very hot during operation. Make sure you do not touch
!
components when making extensions to the boards. There is a danger of burns!
The warranty expires if the device is damaged during the installation or replacement of
i
system expansions. Information on which system expansions you can use is available
from your sales office or the customer service.
Boards with electrostatic sensitive devices (ESD) may be identified by labels.
When you handle boards fitted with ESDs, you must observe the following points under all
circumstances:
•
You must always discharge yourself (e.g. by touching a grounded object) before working.
•
The equipment and tools you use must be free of static charges.
•
Pull out the power plug before inserting or pulling out boards containing ESDs.
•
Always hold boards with ESDs by their edges.
•
Never touch pins or conductors on boards fitted with ESDs.
U41029-J-Z146-1-7400
Important notes
"I/O
board" -
"Replacing the lithium
English - 3
Advertisement
Table of Contents
