Table of Contents
Advertisement
Other functions
Security
(Menu 4-5-*)
Your phone provides you with many security
options, including a user-programmable lock code
and call restriction features.
To access the Security menu, you need to enter a
lock code. The lock code is preset to "0000" at the
factory.
Lock phone
(Menu 4-5-*-1)
When the phone is locked, you cannot operate the
phone until you enter the lock code.
The following options are available:
Unlocked: The phone remains unlocked.
On power-up: The phone locks automatically the
next time you turn it on.
Lock now: The phone locks immediately.
To place an emergency call, enter the number and
then press
. The phone recognizes three
emergency numbers stored in the Emergency #
menu (Menu 4-5-*-4).
To unlock the phone, press one of the Menu soft
key,
,
, Volume, or Navigation keys and
enter the lock code. The phone returns to Standby
mode.
Change lock
(Menu 4-5-*-2)
This feature allows you to change your current
lock code to a new one. The lock code is preset to
"0000" at the factory.
Enter a new, four-digit lock code and then press
.
96
Restriction
(Menu 4-5-*-3)
This feature allows you to restrict all of the
outgoing calls.
Select On to restrict the calls, or Off to deactivate
the restriction.
Emergency #
(Menu 4-5-*-4)
Your phone provides you with the option for
storing three emergency numbers. All of these
numbers can be manually dialed at any time even
when your phone is locked or all of the outgoing
calls are restricted.
IMPORTANT NOTICE!
Emergency calling may not be available on all
wireless networks at all times. A connection
cannot always be guaranteed, due to various
transmission methods, network parameters and
user settings used to complete a call from your
wireless phone.
DO NOT depend on this phone as a primary
method of dialing 100 or for any other essential or
emergency communications.
Remember to always turn your phone on and
check for the adequate signal strength before
placing a call.
To store an emergency number:
1. Press
or
to select a location and press
.
2. If necessary, press and hold
old number.
Other functions
to clear the
97
Advertisement
Table of Contents
