Table of Contents
Advertisement
Call functions
Manual pause dialing
You can enter pauses manually during the dialing
process.
1. Enter the phone number of the service you
want to call, such as a bank's teleservice phone
number.
2. Press the Menu soft key to access the options.
3. Select the required pause type and press
• Press
for Hard pause. The letter "P"
displays, meaning that a hard pause will
occur at that point in the dialing sequence.
• Press
for 2sec pause. The letter "T"
displays, meaning that a "Timed" pause will
occur at that point in the dialing sequence.
4. Enter the number to be sent after the pause
and then press
to dial the first number.
5. For a hard pause, press
prompt to send the additional number after
connecting.
If you enter the number using a 2-second
pause(s), the phone sends the number that
follows the pause two seconds after the
connection.
34
.
again at the
Adjusting the volume
During a call, if you want to adjust the voice
volume, use the Volume keys on the left side of
the phone.
Press the
key to increase the volume level and
the
key to decrease the level. The image on the
display shows all eight levels; the more bars you
see, the higher the level is.
In Standby mode, you can also adjust the keypad
tone volume using these keys.
Answering a call
When somebody calls you, the phone alerts you
by ringing and blinking the service light.
If the caller can be identified, the caller's phone
number, or name if available in your Contacts,
displays.
Call functions
35
Advertisement
Table of Contents
