Opel Adam 1.0 2019 Owner's Manual page 187

To remove:
1. Open the load compartment floor
3 57.
Remove storage box if equipped
3 56.
2. Remove the wheel wrench from
the tool box.
3. Fit the wheel wrench on the
hexagon bolt near the tool box
and turn it anticlockwise until a
resistance is noticeable.
4. Lift the spare wheel holder slightly
by hand and unhook the catch.
5. Lower the spare wheel holder.
Vehicle care
6. Lift the spare wheel holder slightly
by hand and detach the safety
cable.
7. Lower holder all the way and
remove spare wheel.
8. Change the wheel 3 183.
The damaged wheel must be
secured in the load compartment,
see below.
9. Lift the empty spare wheel holder
and insert the safety cable.
10. Lift the spare wheel holder farther
and engage in catch. The open
side of the catch must point in the
direction of travel.
185