Belkin OmniView F1DP104Aea User Manual page 48

Troubleshooting
When I switch from one port to another, mouse movement is
completely erratic.
• Make sure you do not have more than one mouse driver installed. Make sure
that the driver is either for a standard PS/2 mouse or a Microsoft server-
compatible PS/2 mouse.
• Make sure you do not have any mouse drivers loaded in your "CONFIG.SYS"
or "AUTOEXEC.BAT" files.
• Avoid moving the mouse or pressing the mouse button when switching ports
on the SMB CAT5 KVM Switch.
• Stop moving the mouse, wait for five seconds, and then move the mouse
again. The Server Interface Module will synchronize the mouse movement
automatically.
USB
I am connecting the USB Server Interface Module to my USB server and my
keyboard and mouse do not work.
• Prior to connecting the USB Server Interface Module, make sure that the HID
USB driver is installed on each server. (To install the HID USB driver, connect
a USB mouse and USB keyboard to the server. A Windows operating system
should automatically install the drivers.)
Some of the keys on my keyboard are not functioning properly when I use a
Mac server.
®
• If you are using a PC keyboard on a Mac system, a few of the option keys on
your PC keyboard may be reversed. All major keys will function as labeled.
1
2
3
4
5
6
7
8
45