Page 2
Fluid is then injected to produce a small bleb just under the skin, which causes a visible welt on the outer skin surface. (See figure 1.) Remove fluid from the welt by withdrawing the fluid after practice. Actual product may vary slightly from photo. Nasco reserves the right to change product color, materials, supplies, or function as needed.
Page 3
Normal surface soil can be removed with a mild soap and lukewarm water. Use Nasco Cleaner (LF09919U) to remove stubborn stains. Simply apply the Nasco Cleaner to the soiled area and wipe with a clean, soft paper towel. DO NOT clean the simulator with solvents or corrosive material, as they will cause damage.