Table of Contents
Advertisement
The network is slow /
having problem when
transferring large files
Router is not responding
to me when I want to
access it by web browser
with encryption. Please contact the
owner of access point to ask for correct
passphrase / security key.
4. The access point you wish to connect
only allows network cards with specific
MAC address to establish connection.
Please go to 'About' tab and write the
value of 'Phy_Addess' down, then
present this value to the owner of access
point so he / she can add the MAC
address of your network card to his / her
access point's list.
1. Move closer to the place where access
point is located.
2. Enable 'Wireless Protection' in
'Advanced' tab.
3. Try a lower TX Rate in 'Advanced' tab.
4. Disable 'Tx Burst' in 'Advanced' tab.
5. Enable 'WMM' in 'QoS' tab if you need
to use multimedia / telephony related
applications.
6. Disable 'WMM – Power Save Enable' in
'QoS' tab.
7. There could be too much people using
the same radio channel. Ask the owner
of the access point to change the channel
number.
Please try one or more solutions listed
above.
a. Please check the connection of power
and network cable of this router. All
cords and cables should be correctly and
firmly inserted to the router.
b. You must use the same IP address
section which your router (DHCP server)
uses.
c. Are you using MAC or IP address filter?
Advertisement
Table of Contents
