Ddr3_Sdram Specifications - Fujitsu MB86R12 Design Manualline

MB86R12 Application Note
DDR3 Interface PCB Design Guideline
3.

DDR3_SDRAM specifications

This chapter shows DDR3_SDRAM that can be used for the DDR3 interface with MB86R12.
If an alternative device fulfills the same requirements, it can also used.
Please note however, that if you use an alternative device, there may be differences concerning I/O quality
which may require your attention. However, all I/O characteristics should be checked as could differ.
Even if you use the device(s) listed below, you must refer to the specifications provided by the DRAM
manufacturer for the confirmation of details (e.g. operating temperature conditions etc.).
Table 3-1 Recommended DDR3_SDRAM
Manufacturer
Micron MT41J128M16HA-15E
Technology, Inc.
FUJITSU SEMICONDUCTOR CONFIDENTIAL
Product name IBIS model name Driver strength
v69a_at.ibs
(2Gb 1333Mbps)
34Ω
3
Remarks
It has already been verified by
the transmission line analysis.