Configuring Client TCP/IP
4.
In the Local Area Connection Properties box, verify the box next
to Internet Protocol (TCP/IP) is checked. Then highlight the
Internet Protocol (TCP/IP), and click the Properties button.
5.
Select "Obtain an IP address automatically" to configure your
computer for DHCP. Click the OK button to save this change and
close the Properties window.
6.
Click the OK button again to save these new changes.
7.
Reboot your PC.
8.
To obtain new network settings see "Obtain IP Settings from
Your EZ-Stream Wireless Router" on page 16.
Configuring Your Computer in Windows XP
The following instructions assume you are running Windows XP with
the default interface. If you are using the Classic interface (where the
icons and menus look like previous Windows versions), please follow
the instructions for Windows 2000 outlined above.
1.
Access your Network settings by clicking Start, choose Control
Panel, select Network and Internet Connections and then click
on the Network Connections icon.
2.
Locate and double-click the
Local Area Connection icon for
the Ethernet adapter that is
connected to the Router. Next,
click the Properties button.
20