Panasonic FZ-G1 series Operating Instructions Manual page 10

First-time Operation
3
4
10
3 Connect your computer to a power outlet
A Open the cover.
B Connect the computer to a power outlet.
The battery charging starts automatically.
CAUTION
l Do not disconnect the AC adaptor until the first-time operation procedure is completed.
l When using the computer for the first time, do not connect any peripheral device except the battery pack and
AC adaptor.
l Handling the AC adaptor
Ÿ Problems such as sudden voltage drops may arise during periods of thunder and lightning. Since this could
adversely affect your computer, an uninterruptible power source (UPS) is highly recommended unless run-
ning from the battery pack alone.
4 Turn on the computer
Press and hold the power switch
CAUTION
l Do not press the power switch repeatedly or do not hold the power switch for four seconds or longer.
5 <For MUI OS model>
Select language and OS (32-bit or 64-bit)
CAUTION
l Carefully choose your language because you cannot change it later. If you set a wrong language, you need to
reinstall Windows.
NOTE
l You can operate with the Tablet Buttons. Follow the instructions.
: ↑
: ↓
: Enter key
: Tab key
A Select language and OS (32-bit or 64-bit) on "Select OS" screen and touch [OK].
The language setting will start by touching [OK] on the confirmation screen.
The language and OS setting will be completed in about 15 minutes.
B When termination screen is displayed, touch [OK] to turn off the computer.
(B) until the power indicator (A) lights.