SMC Networks ADSL Barricade SMC7204BRA User Manual page 110

Field
Last Fail Cause:
DNS:
SDNS:
Security Protocol:
Login Name:
Viewing PPP Interface Details
Description
This field indicates the action that ended the
previous PPP session.
[No Valid PADO Recvd]:
The unit initiated a PPPoE handshake but did not
receive a packet in reply from the ISP.
[No Valid PADS Recvd]:
After the initial handshake, the unit did not receive
a confirmation packet from the ISP.
[Stopped by User]:
The user stopped the connection (for example,
by changing the Configuration Manager settings
for the PPP interface.)
[No Activity]:
The PPP communication timed out, in accordance
with the timeout period specified on the PPP
Configuration page.
[Auth Failure]:
The ISP could not authorize the connection based
on the user name and/or password provided.
[PADT Recvd]:
The ISP issued a special packet type to terminate
the PPP connection.
[VC down]:
The Virtual Circuit between the unit and the ISP
is down.
[Internal failure]:
A system software failure occurred.
This is the IP address of the DNS server (located
with your ISP) used on this PPP connection.
The IP address of the secondary DNS server
(located with your ISP) used on this PPP connection.
This field indicates the type of PPP security your
ISP uses:
[PAP] (Password Authentication Protocol)
[CHAP] (Challenge Handshake Authentication
Protocol).
This is the name you use to log in to your ISP each
time this PPP connection is established.
111