GE PVM2170 Owner's Manual page 21

Care and cleaning of the oven.
Replacing the light bulb.
C
B OOKING
ACK M ENU
S A DD
ETTINGS 30 S EC
remove screw.
C
B OOKING
ACK M ENU
A
S
ETTINGS 30 S
Plastic Color Panels
Use a clean, soft, lightly dampened cloth, then dry thoroughly.
Door Seal
It's important to keep the area clean where the door seals against the microwave. Use only mild,
non-abrasive detergents applied with a clean sponge or soft cloth. Rinse well.
Bottom
Clean off the grease and dust on the bottom often. Use a solution of warm water and detergent.
Cooktop Light/Nite Light
Replace with a 120 volt, 50 watt (max.)
D S
EFROST TEAM
S TART halogen bulb. Order WB08X10051 from your
AUSE P
C
ANCEL
O FF
T IMER
on/off
GE supplier.
1
To replace the cooktop light/nite light, first
disconnect the power at the main fuse or
circuit breaker panel, or pull the plug.
2 Remove the screw from the side of the light
compartment cover and lower the cover
until it stops.
D S
EFROST TEAM
S TART
P AUSE
C
ANCEL
O FF
DD T IMER
EC on/off
3
Be sure the bulb is cool before removing.
Break the adhesive seal by gently
unscrewing the bulb.
4
Screw in the new bulb, then raise the light
cover and replace the screw. Connect
electrical power to the oven.
GEAppliances.com
21