SMC Networks SMC EZ Connect SMC2635W User Manual page 26

T W
HE IRELESS
Or
1. Select 128-bit or 64-bit in the Encryption field.
2. In the Key Type field, select ASCII or Hex.
3. In the Default Key field, select one key as the default key that
you want to use for encryption.
4. Manually type in a string of characters in the corresponding
Key number field that you selected in step 3.
5. Click Apply changes to allow the settings to take effect.
Note:
16
U
TILITY
When setting up WEP without using the Passphrase
function, if the Key Type is set to Hex, only hexadecimal
characters (range: 0~9 and A~F) can be used. When
Encryption is set to 64-bit, a maximum of 10 Hex
characters can be entered in the Key field. When
Encryption is set to 128-bit, a maximum of 26 Hex
characters can be used. If the Key Type is set to ASCII,
and Encryption is set to 64-bit, then 5 ASCII digits can be
used in the Key field. For 128-bit Encryption, 13 ASCII
characters can be used.