Yamaha TT-S303 Owner's Manual page 3

Water warning
• Do not expose the unit to rain, use it near water
or in damp or wet conditions, or place on it any
containers (such as vases, bottles or glasses)
containing liquids which might spill into any
openings or places where water may drop. A
liquid such as water getting into the unit may
cause a fire, electric shocks, or malfunctions. If
any liquid such as water seeps into the device,
turn off the power immediately and unplug the
power cord from the AC outlet. Then, request an
inspection from the dealer where you purchased
the unit or from qualified Yamaha service
personnel.
• Never insert or remove an electric plug with wet
hands. Do not handle this unit with wet hands.
Failure to observe this may cause electric shocks
or malfunctions.
Fire warning
• Do not place any burning items or open flames
near the unit, since they may cause a fire.
If you notice any abnormality
• If any of the following abnormalities occur,
immediately turn off the power and disconnect
the power plug.
- The power cord/plug is damaged.
- An unusual smell or smoke is emitted from the
unit.
- Foreign material gets into the interior of the
unit.
- There is a crack or damage in the unit.
Continued use could cause electric shocks, a fire,
or malfunctions. Immediately request an
inspection or repair from the dealer where you
purchased the unit or from qualified Yamaha
service personnel.
• Be careful not to drop or apply strong impact to
this unit or the AC adaptor. If you suspect the unit
may have been damaged due to dropping or
impact, immediately turn off the power and pull
the power plug from the AC outlet. Failure to
observe this may cause electric shocks, a fire, or
malfunctions. Immediately request an inspection
from the dealer where you purchased the unit or
from qualified Yamaha service personnel.
CAUTION
This content indicates "risk of injury."
Power supply/AC adaptor
• Do not cover or wrap the AC adaptor with a cloth
or blanket. Failure to observe this may trap heat,
causing deformation in the case or a fire.
• Do not use an AC outlet where the power plug fits
loosely when inserted. Failure to observe this may
cause a fire, electric shocks, or burns.
• When removing the electric plug from the unit or
an AC outlet, always hold the plug itself and not
the cord. Pulling by the cord can damage it and
cause electric shocks or a fire.
• Insert the power plug firmly all the way into the
AC outlet. Using the unit when it is not plugged in
sufficiently can cause dust to accumulate on the
plug, causing a fire or burns.
Installation
• Do not place the unit in an unstable position
where it might accidentally drop or fall over and
cause injuries.
• Ensure that the top is facing upwards. Failure to
observe this may cause malfunctions or for the
unit to fall and cause injury.
• Do not install the unit in places where it may
come into contact with corrosive gases or salt air
or places that have excessive smoke or steam.
Doing so may result in malfunction.
• Avoid being near the unit during a disaster, such
as an earthquake. Since the unit may turn over or
fall and cause injury, quickly move away from the
unit and go to a safe place.
• Before moving this unit, be sure to turn off the
power switch and disconnect all connection cables.
Failure to observe this may damage the cables or
cause you or someone else to trip and fall.
Hearing loss
• Before connecting the unit to other devices, turn
off the power for all devices. Failing to do so may
result in hearing loss, electric shock, or device
damage.
• When turning on the AC power in your audio
system, always turn on the amplifier or receiver
LAST, to avoid hearing loss and speaker damage.
When turning the power off, the amplifier or
receiver should be turned off FIRST for the same
reason. Failure to observe the above may cause
hearing impairment or speaker damage.
3
En