Accessory Settings - Nokia 5100 User Manual

44. Note that the settings you make, change the settings in the active
profile.
• Select
Incoming call alert
an incoming voice call. The options are Ringing, Ascending,
and Off.
once, Beep once
• Select for incoming voice calls. To select ringing
Ringing tone
tones that have been saved in the
the ringing tone list.
• Select and
Ringing volume
and messages. The vibrating alert does not work when the phone
is connected to a charger, a desktop stand, or a car kit.
Tip: If you receive a ringing tone via OTA or by downloading,
you can save the ringing tone in the Gallery.
• Select to set the phone to flash the integrated
Light alert
flashlight during an arriving call.
Note: If you have switched the flashlight on before the incoming call,
the flashlight will not flash.
• Select Message alert tone
messages, tones, or
Keypad
sound tones for example, when the battery is running out of
power.
• Select to set the phone to ring only upon calls from phone
Alert for
numbers that belong to a selected caller group. Scroll to the caller
group you want or
All calls

Accessory settings

Accessory settings menu is shown only if the phone is or has been
connected to one of the compatible headsets or loopsets.
Press Menu, and select Settings
or if the corresponding accessory is or has been
Headset Loopset
connected to the phone.
• Select to select the profile you want to be
Default profile
automatically activated when you connect the selected accessory.
You can select another profile while the accessory is connected.
M e n u f u n c t i o n s
to select how the phone notifies you of
Gallery , select Open gallery
for incoming voice calls
Vibrating alert
to set the alert tone for the incoming
to set the phone to
Warning tones
and press Mark.
and Accessory settings. You can select
Ring
from
52