Tone Settings; Accessory Settings - Nokia 6310i Quick Manual

• TONE SETTINGS

Press Menu, select Settings and then Tone settings. You can find the same
settings in the Profiles menu, see Profiles (Menu 3) on page 43.
Select Incoming call alert to choose how the phone notifies you of an
incoming voice call. The options are Ringing, Ascending, Ring once, Beep
once and Off.
Select Ringing tone, Ringing volume and Vibrating alert for an incoming
voice call and an incoming message. The vibrating alert does not work
when the phone is connected to a charger, desktop stand, or a car kit.
Tip:If you receive a ringing tone via IR or as a text message,
you can save ten ringing tones at a time in the ringing tone
list.
Select Message alert tone to set the alert tone for the incoming messages,
Keypad tones, or Warning tones to set the phone to sound tones, for
example, when the battery is running out of power.
Select Alert to set the phone to ring only upon calls from phone numbers
that belong to a selected caller group. Scroll to the caller group you want
or All calls and press Mark.

• ACCESSORY SETTINGS

The accessory settings menu is shown only if the phone is or has been
connected to one of the following Nokia accessories, headsets HDC-5,
HDE-2 or HDD-1 or handsfree car kit CARK-91.
Press Menu, select Settings and Accessory settings. Select Headset,
Handsfree or Loopset.
Select Default profile to select the profile you want to be automatically
activated when you connect the selected accessory. You can select
another profile while the accessory is connected.
[ 63 ]
Profiles
3