Cold Start Of The Pg 740 Piii - Siemens Simatic PG 740 PIII Operating Instructions Manual

Installing and Operating the PG 740 PIII
5.2

Cold Start of the PG 740 PIII

Installing the operating system
When powering up the PG 740 PIII for the first time the operating system is set up
automatically (depending on the version delivered: Windows 98, Windows NT or
Windows 2000). Please proceed as follows:
1. Switch on the PG 740 PIII.
2. The PG executes a self-test. During self-test the following message appears on
the screen:
Wait until the message disappears and follow the instructions displayed on the
screen.
3. Enter the user information (name,company).
4. Enter your product key. The product key can be found on the device in the line
"Product Key" of the "Certificate of Authenticity".
Note
Never switch off your PG before software installation has been completed in order
to avoid the loss of any software components which are essential for a regular
operation of the device.
Do not change the BIOS default values.
Startup under Windows 98
The operating system is set up once you have entered the requisite information.
The Welcome to Windows 98 screen helps you to get familiar with the
Desktop-user interface.
Now the user interface is displayed following system startup every time you power
up or reset the PG.
You can find information for the installation, login, password entry and registration
in the manual "Getting Started Microsoft Windows 98" in chapter 2 "Windows 98
Installation".
Startup under Windows 2000
After you have entered the requisite information and the operating system has
been set up, the PG will be restarted.
Via the "Getting Started with Windows 2000" program you can get acquainted with
Windows 2000.
You can find information for the installation, login, administrator account, password
entry, creation of an emergency disk and startup of Windows 2000 in the manual
"Microsoft Windows 2000 Professional".
5-2
Press <F2> to enter SETUP
Operating Instructions PG 740 PIII
A5E00063150-03