Advertisement
Product View
Dirt Container
Release Button
Carry Handle
Pre-Motor
Filter
Post-Motor
Filter
WARNING
Problem
Brush roll
doesn't rotate
Vacuum won't
pick
up dirt
Vacuum is hard
to push or pull
Go online to BISSELL.com/support
Going online is quick, easy and offers you benefits over the lifetime of your product.
Lift-O ® Canister
Release Button
To reduce the risk of electric shock, turn power switch off
and disconnect plug from electrical outlet before performing
maintenance or troubleshooting checks.
Possible causes
Brush roll switch is turned off.
Vacuum is locked in upright
position.
Vacuuming on Premium Soft
Carpet.
Brush roll has lodged debris or
other entanglements, keeping
the brush from rotating.
Lift-Off® Pod is not securely
seated.
There is a clog in the vacuum.
Dirt Container is not seated
correctly.
Vacuum is in the wrong Floor
Type Setting.
Cord Clip
Power Switch
Panel
Adjustable
Floor Type
Setting
Quick Release®
Cord Wrap
2-in-1
Pet Brush
LED Lighted
Crevice Tool
Remedies
Make sure Brush roll switch is on.
Recline vacuum and switch on the Brush
roll.
Turn the Floor Type Setting towards high
carpet.
Unplug, check for debris, and remove the
debris.
Remove Lift-Off® pod and replace,
making sure that it "clicks" into place.
Check inside of hose for clogs by
disconnecting from vacuum. Check for
debris that may be restricting the brush
roll rotation.
Press the Tank Release to release the
Dirt Container and reseat properly.
Turn the knob towards the high carpet
setting.
Stretch
Hose
Wand
Handle
(removable)
Telescoping
Extension
Wand
Advertisement
