Installing The Power Button With Fingerprint Reader; Display Assembly - Dell Precision 5530 Service Manual

Installing the power button with fingerprint reader

NOTE: Step 3, 4, and 5 are applicable only for the computers that are shipped with fingerprint reader.
1 Place the power button and fingerprint reader (optional) into its slot on the palm-rest and keyboard assembly [1].
2 Replace the screw (M2x1.7) that secures the power button to the palm-rest and keyboard assembly [2].
3 Replace the screw (M1.6x1.8) that secures the fingerprint-reader to the palm-rest and keyboard assembly [3].
4 Affix the tape that secures the power button cable to the palm-rest and keyboard assembly [4].
5 Route the fingerprint-reader cable to the palm-rest and keyboard assembly [5].
6 Connect the fingerprint-reader cable to the system board and close the latch [6].
7 Install the I/O board.
8 Install the battery.
9 Install the I/O-board interposers.
10 install the base cover.
11 Follow the procedure in

Display assembly

After working inside your computer.
Removing and installing components 41