Power Led; Ring Led - NETGEAR Orbi Voice User Manual

6. Sync button (also used for WPS connection). Use the sync button to sync your
Orbi Voice to your Orbi router or to connect WPS-enabled devices to your Orbi
Voice.
7. Ethernet ports. Connect Ethernet devices to the Ethernet ports.
8. Power On/Off button and Power LED. Press the Power On/Off button to turn
your Orbi Voice on or off. The Power LED is located above the Power On/Off button.
9. Power connector. Connect the power adapter to the Power connector.
10. Reset button. To factory reset your Orbi Voice, press the Reset button until the
Power LED blinks amber.

Power LED

The Power LED is located above the Power On/Off button on the rear panel.
The following is the LED behavior for the Power LED:
• Solid green. Power is on.
• Solid amber. The Orbi Voice is booting.
• Blinking amber. The Orbi Voice is resetting to factory default settings.
• Blinking red. The firmware is corrupted.
• Off. Power is not supplied.

Ring LED

When your Orbi Voice syncs with your Orbi router, it lights the following colors:
Table 1. Ring LED behavior during syncing
LED Color LED Behavior
Pulsing The Orbi Voice is booting, or your Orbi Voice is attempting to sync with your Orbi router.
white
Solid white The Orbi Voice is ready to sync with your Orbi router.
Solid blue Your Orbi Voice and Orbi router successfully synced, and the connection between your Orbi Voice
and router is good.
The ring LED lights solid blue for about three minutes and then turns off.
Overview
Orbi Voice
6 User Manual