Table of Contents
Advertisement
Clear All Memory
To clear all the S-Seek alerts stored in memory, do the following:
1. Use the CHANNEL UP and CHANNEL DOWN buttons to highlight "Clear All Memory", and press the Select
button.
2. At the confirmation screen, use the CHANNEL UP and CHANNEL DOWN buttons to highlight "Yes", and
press the Select button.
The S-Seek memory is now erased. To exit the Memory Options menu, press the MENU button.
Auto Select
Auto Select chooses whether the Receiver immediately tunes to a channel when a channel is highlighted, or
whether you must first press the Select button to tune to a highlighted channel in any of the list modes. Turn
Auto Select On if you would like the Receiver to automatically tune to the highlighted channel without you
having to press the Select button. This will allow you to quickly listen to all the available programming in any
displayed channel list.
Note: The default setting for Auto Select is Off, meaning that you must press the Select button to tune to
a channel in a listing.
43
Advertisement
Table of Contents
