Using Instant Replay - Sirius Satellite Radio Xact XTR8CK Instruction Manual

Using Instant Replay

To begin using the Instant Replay feature of the Receiver, press the Pause/Play button. This causes the
Receiver to enter the Instant Replay Pause mode, which mutes the audio from the Receiver. A "Paused"
message will be displayed for two seconds to confirm that the Receiver has entered the Instant Replay mode.
To listen to the audio that was stored, press the Pause/Play button again and the Receiver will begin to play
back the audio stored in the Instant Replay memory from the point where you pressed the Pause/Play button.
As you are listening to the playback of the stored audio, you may either fast forward or rewind through the
stored audio by pressing the Fast Forward or Rewind buttons, without having to press the Pause/Play button
first. Refer to the previous sections describing the Rewind and Fast Forward buttons for specific instructions
for their use.
Note: If the Receiver is tuned to another channel while in the Instant Replay mode, the Instant Replay
mode is exited, all the audio stored in the Instant Replay memory is erased, and the tuned channel
begins to play.
Also note that tuning to another channel may automatically occur if another feature of
the Receiver has been programmed to do so. When the Instant Replay mode is active, status
information is shown at the bottom of the Receiver's display screen. The Instant Replay mode icon
that is displayed at the bottom left of the screen indicates the current mode.
Pause mode- This indicates that the Receiver is paused and muted.
Play mode- This indicates that you are in the Instant Replay playback mode, listening to stored audio.
Fast Forward mode- This indicates that you are fast forwarding through the stored Instant Replay audio.
Rewind mode- This indicates that you are rewinding, or moving backwards, through the stored Instant Replay audio.
31