Installation Requirements; Tools And Parts - Maytag W10376697 Service Manual

inSTallaTiOn reQuireMenTS

For complete installation instructions
See Links to documents page.

Tools and parts

Gather the required tools and parts before
starting installation. The parts supplied are in
the washer spin basket.
Tools needed for connecting water inlet hoses:
• Pliers (that open to 1 9/16" [39.5 mm])
• Flashlight (optional)
Tools needed for installation:
• 8" or 10" pipe wrench
• 8" or 10" adjustable wrench that opens to 1"
• Flat blade screwdriver
• Star blade screwdriver
• T-20 security screwdriver
• 1" hex head socket or wrench
• 5/16" socket or wrench
• Pliers that open to 1 9/16"
• Level
• Utility knife
• 1/4" nut driver
• Locking pliers
• Caulk gun and caulk (if installing new vent)
• Vent clamps
• Pipe-joint compound suitable for gas type
• 27" wood block
• 1/2" and 9/16" open-end wrenches
• Ruler or measuring tape
• Flashlight (optional)
Parts supplied:
A
D
A. U-shaped hose form
B. Water inlet hoses (2)
C. Inlet hose washers (4)
D. Transit bolt hole plug (4)
E. Beaded tie strap
F. Drain hose
G. Hose clamp
2-1
B
C
E G
F