Honeywell FALCON MJ Pulse/M-Bus Operating Instructions Manual
  1. Manuals
  2. Brands
  3. Honeywell Manuals
  4. Control Unit
  5. FALCON MJ Pulse/M-Bus
  6. Operating instructions manual

Honeywell FALCON MJ Pulse/M-Bus Operating Instructions Manual

M-bus module for honeywell / elster m100i and m120i waters meters
Hide thumbs
Table of Contents

Advertisement

Quick Links

FALCON MJ Pulse/M-Bus operating instructions
Honeywell / Elster M100i and M120i waters meters
Content
1
Description of functions ....................................................................................................... 2
2
Installation and commissioning ........................................................................................... 3
2.1
Installing Falcon MJ M-Bus ........................................................................................... 3
2.2
Connection .................................................................................................................... 3
3
Configuration with MBCONF ............................................................................................... 3
3.1
Installation ..................................................................................................................... 3
3.2
Info tab card .................................................................................................................. 4
3.3
Falcon MJ tab card ....................................................................................................... 7
3.4
Extended configuration / alarms tab ............................................................................ 10
3.4.1
Alarm (Activation) ................................................................................................. 11
3.4.2
Occurred alarms ................................................................................................... 11
3.4.3
Pulse settings ....................................................................................................... 12
3.4.4
Manufacturer / generation .................................................................................... 13
3.4.5
Other .................................................................................................................... 13
3.4.6
Security ................................................................................................................ 13
4
M-Bus telegrams ............................................................................................................... 15
4.1
SND_UD: Send User data; telegram selection ........................................................... 15
4.1.1
Select Normal readout (Short telegram) ............................................................... 15
4.1.2
Select Enhanced readout (Long telegram) ........................................................... 16
4.2
RSP_UD: data transfer on request ............................................................................. 17
4.2.1
4.2.2
4.2.3
4.2.4
Falcon MJ M-Bus Operating instructions
M-Bus module for
05/18 Generation 1.2
Page 1 of 38

Advertisement

Table of Contents
loading

Related Manuals for Honeywell FALCON MJ Pulse/M-Bus

Summary of Contents for Honeywell FALCON MJ Pulse/M-Bus

  • Page 1: Table Of Contents

    FALCON MJ Pulse/M-Bus operating instructions M-Bus module for Honeywell / Elster M100i and M120i waters meters Content Description of functions ....................... 2 Installation and commissioning ................... 3 Installing Falcon MJ M-Bus ................... 3 Connection ........................3 Configuration with MBCONF ....................3 Installation ........................

  • Page 2: Description Of Functions

    Description of functions The Falcon MJ makes it possible to read out Honeywell / Elster water meters M100i and M120i in a M-Bus system or via a digital pulse output. FALCON MJ Pulse/M-Bus communications module Once the meter index is configured via the M-Bus, the Falcon MJ will transfer the exact meter index shown on the water meter's register.

  • Page 3: Installation And Commissioning

    Installation and commissioning Installing Falcon MJ M-Bus Refer to the separate installation instructions inside the package. Connection The Falcon MJ will be delivered with a permanently attached 5 wires cable, 3m length. The yellow and green M-Bus wires can be connected with e.g. suitable distribution terminal strips. The polarity of the M-Bus wires is irrelevant.

  • Page 4: Info Tab Card

    Info tab card The lower third of this card is also visible in every other card. This makes the following entry fields and control buttons continuously available: COM-Port specifies the serial interface of the PC to which the M-Bus level converter is connected.
  • Page 5 Generation displays the version of the connected M-Bus module's firmware. Type displays the device type of the connected device (here: Honeywell / Elster Falcon MJ). This field cannot be edited (read only). Status displays the M-Bus status of the connected device.
  • Page 6 Log window The so-called "Log window" is always visible. All M-Bus communication telegrams will be recorded in this window. Data will be displayed in hexadecimal representation. Output in the log window can be marked and then stored in the Windows clipboard with the "CTRL+C" key combination. From the clipboard it is easy to paste the data into a text processing program for documenting purposes.

  • Page 7: Falcon Mj Tab Card

    Falcon MJ tab card This tab card shows the current settings and values for the Falcon MJ M-Bus. The entry fields and control buttons, described below, permit device parameters to be changed: Primary address is the M-Bus address of the Falcon MJ. A value between 0 and 250 can be entered into this field if the primary address needs to be changed.
  • Page 8 is an 8-character M-Bus ID used for secondary addressing on the Falcon MJ. We recommend that the serial number of the connected water meter is programmed here. Default: Secondary address is set as the last 8 digits of the module´s Medium describes the medium to be measured on the selected Falcon MJ.
  • Page 9 Maximum Flow rate displays the max flow rate registered by the module with the according date. The date will only be shown if the module is connected to the M-Bus permanent. For quick read out via MBConf, use the “Historical values” button to see the last monthly values and also the last monthly max.

  • Page 10: Extended Configuration / Alarms Tab

    Activate short tel. switches the mode for the M-Bus protocol on the Falcon MJ to short-form telegram (without monthly values) Activate long tel. switches the mode for M-Bus protocol on the Falcon MJ to long telegram (with monthly values). Read updates M-Bus data on the selected tab card.

  • Page 11: Alarm (Activation)

    This tab card shows the currently set configuration for the Falcon MJ module. Functions can be activated by marking respective check-boxes. 3.4.1 Alarm (Activation) The alarm activation settings enables or disables the corresponding alarms via the Tamper signal (red wire). The activation or deactivation of any alarm here does not influence the alarm management via the M-Bus wire.

  • Page 12: Pulse Settings

    Manipulation alarm Is activated when a magnetic manipulation attempt was detected. It is also activated in combination with the removal alarm. A date and time is stored for the first occurred alarm event. Backward flow alarm is activated when more than 3 litres continuous backflow are measured. The date and time is stored for the first backflow event.

  • Page 13: Manufacturer / Generation

    3.4.4 Manufacturer / generation The manufacturer and generation identifiers of the Falcon MJ module can be changed. For the manufacturer, the following manufacturer codes are possible: ELR; ELS; EMT; HON This possibility allows the customer to set up the identification of the module according the DIN 43863-5 meter serial numbers 3.4.5 Other...
  • Page 14 The following control buttons are also always visible: Read updates M-Bus data on the selected tab card. Even fields which cannot be modified will be updated. Exit Close the extended configuration/alarm tab All stored alarms will be cleared to “0” Reset alarms Falcon MJ M-Bus Operating instructions 05/18 Generation 1.2...

  • Page 15: Bus Telegrams

    M-Bus telegrams SND_UD: Send User data; telegram selection 4.1.1 Select Normal readout (Short telegram) SND-UD (M-Bus) OMS M-Bus frame Water meter example Field Name Content Bytes [hex] Byte No plain Start Start byte L Field Length of data (xx bytes) L Field Length of data (xx bytes) Start...

  • Page 16: Select Enhanced Readout (Long Telegram)

    4.1.2 Select Enhanced readout (Long telegram) SND-UD (M-Bus) OMS M-Bus frame Water meter example Field Name Content Bytes [hex] Byte No plain Start Start byte L Field Length of data (xx bytes) L Field Length of data (xx bytes) Start Start byte C Field Send user data...

  • Page 17: Rsp_Ud: Data Transfer On Request

    RSP_UD: data transfer on request Short – telegram (for Modules with Firmware 1.0.3 or older) 4.2.1 Water meter OMS M-Bus frame example Bytes Field Name Content [hex] Byte No plain Start Start byte L Field Length of data (xx bytes) L Field Length of data (xx bytes) Start...
  • Page 18 Value Value DIF (8 digit BCD Stor. 1) VIF (Volume l) Value LSB Value Value ( = 12345,678 m³) Value MSB DIF (Date Stor. 1;Type G) VIF (Date + Extension) VIFE (Future Value) Value Value DIF (8 digit BCD) VIF (Volume l + Extension) VIFE (backward flow) Value LSB Value...

  • Page 19: Long - Telegram (For Modules With Firmware 1.0.3 Or Older)

    DR12 DIF (Manufacturerspecific) DR12 PBIT Checksum Stop Stop byte Long – telegram (for Modules with Firmware 1.0.3 or older) 4.2.2 Long telegram with monthly values. Frame 1: RSP-UD (M-Bus) Meter OMS M-Bus frame example Bytes Field Name Content [hex] Byte No Start Start byte L Field...
  • Page 20 Value Value ( 31.05.2008 23:50 ) Value MSB DIF (Date Stor. 1;Type G) VIF (Date) Value Value DIF (8 digit BCD Stor. 1) VIF (Volume l) Value LSB Value Value ( = 12345,678 m³) Value MSB DIF (Date Stor. 1;Type G) VIF (Date + Extension) VIFE (Future Value) Value...
  • Page 21 DR11 VIF (Date, Time) DR11 Value LSB DR11 Value DR11 Value DR11 Value MSB DR12 DIF (2 digit BCD + Extension) DR12 DIFE (Storagenumber 8) DR12 VIF (Second Extensio table) DR12 VIFE (Size of storage block) DR12 Value (13) DR13 DIF (2 digit BCD + Extension) DR13 DIFE (Storagenumber 8)
  • Page 22 DR18 Value DR18 Value MSB DR19 DIF (8 digit BCD + Ext.) DR19 DIFE (Storagenumber 12) DR19 VIF (Volume l) DR19 Value LSB DR19 Value DR19 Value DR19 Value MSB DR20 DIF (8 digit BCD + Ext.) DR20 DIFE (Storagenumber 13) DR20 VIF (Volume l) DR20...

  • Page 23: Start Start Byte 2 L Field 3 L Field

    DR25 VIF (Volume l) DR25 Value LSB DR25 Value DR25 Value DR25 Value MSB DR26 DIF (8 digit BCD + Ext.) DR26 DIFE (Storagenumber 19) DR26 VIF (Volume l) DR26 Value LSB DR26 Value DR26 Value DR26 Value MSB DR27 DIF (8 digit BCD + Ext.) DR27 DIFE (Storagenumber 20)

  • Page 24: Device Type

    13 Manufr Manufacturer code 14 Version Version (or Generation number) 15 Device type Device type (Medium=Water) Access number of Meter 16 Access No. 17 Status M-Bus state 18 Config Field no Encryption no Encryption 19 Config Field DR29 DIF (16 bit Int. + max Val. + Extension) DR29 DIFE (Storagenumber 28) DR29...
  • Page 25 DR36 Value DR37 DIF (16 bit Int. + max Val. + Extension) DR37 DIFE (Extension) DR37 DIFE (Storagenumber 32) DR37 VIF (Date Type G) DR37 Value DR37 Value DR38 DIF (16 bit Int. + max Val. + Extension) DR38 DIFE (Extension) DR38 DIFE (Storagenumber 32) DR38...
  • Page 26 DR44 VIF (Volume flow [l/h]) DR44 Value DR44 Value DR45 DIF (16 bit Int. + max Val. + Extension) DR45 DIFE (Extension) DR45 DIFE (Storagenumber 36) DR45 VIF (Date Type G) DR45 Value DR45 Value DR46 DIF (16 bit Int. + max Val. + Extension) DR46 DIFE (Extension) DR46...
  • Page 27 DR52 DIFE (Extension) DR52 DIFE (Storagenumber 39) DR52 VIF (Volume flow [l/h]) DR52 Value DR52 Value DR53 DIF (16 bit Int. + max Val. + Extension) DR53 DIFE (Extension) DR53 DIFE (Storagenumber 40) DR53 VIF (Date Type G) DR53 Value DR53 Value DR54...

  • Page 28: Short - Telegram (For Modules With Firmware 1.0.5 Or Newer)

    Short – telegram (for Modules with Firmware 1.0.5 or newer) 4.2.3 Water meter OMS M-Bus frame example Field Name Content Bytes [hex] Byte No plain Start Start byte L Field Length of data (xx bytes) L Field Length of data (xx bytes) Start Start byte C Field...
  • Page 29 Value ( = 12345,678 m³) Value MSB DIF (Date Stor. 1;Type G) VIF (Date + Extension) VIFE (Future Value) Value Value DIF (8 digit BCD) VIF (Volume l + Extension) VIFE (backward flow) Value LSB Value Value ( = 0,003 m³) Value MSB DIF (Date Max.

  • Page 30: Long - Telegram (For Modules With Firmware 1.0.5 Or Newer)

    Long – telegram (for Modules with Firmware 1.0.5 or newer) 4.2.4 Long telegram with monthly values. Frame 1: RSP-UD (M-Bus) OMS M-Bus frame Water meter example Field Name Content Bytes [hex] Byte No plain Start Start byte L Field Length of data (xx bytes) L Field Length of data (xx bytes) Start...
  • Page 31 Value DIF (8 digit BCD Stor. 1) VIF (Volume l) Value LSB Value Value ( = 12345,678 m³) Value MSB DIF (Date Stor. 1;Type G) VIF (Date + Extension) VIFE (Future Value) Value Value DIF (8 digit BCD) VIF (Volume l + Extension) VIFE (backward flow) Value LSB Value...
  • Page 32 DR11 Value MSB DR12 DIF (2 digit BCD + Extension) DR12 DIFE (Storagenumber 8) DR12 VIF (Second Extensio table) DR12 VIFE (Size of storage block) DR12 Value (13) DR13 DIF (2 digit BCD + Extension) DR13 DIFE (Storagenumber 8) DR13 VIF (Second Extensio table) DR13 VIFE (Storage intervall month)
  • Page 33 DR19 Value DR19 Value DR19 Value MSB DR20 DIF (8 digit BCD + Ext.) DR20 DIFE (Storagenumber 13) DR20 VIF (Volume l) DR20 Value LSB DR20 Value DR20 Value DR20 Value MSB DR21 DIF (8 digit BCD + Ext.) DR21 DIFE (Storagenumber 14) DR21 VIF (Volume l)
  • Page 34 DR26 Value LSB DR26 Value DR26 Value DR26 Value MSB DR27 DIF (8 digit BCD + Ext.) DR27 DIFE (Storagenumber 20) DR27 VIF (Volume l) DR27 Value LSB DR27 Value DR27 Value DR27 Value MSB DR28 DIF (Manufacturerspecific + Frame) DR28 PBIT Checksum...
  • Page 35 DR29 DIFE (Storagenumber 28) DR29 VIF (Date Type G) DR29 Value DR29 Value DR30 DIF (32 bit Int. + max Val. + Extension) DR30 DIFE (Storagenumber 28) DR30 VIF (Volume flow [l/h]) DR30 Value DR30 Value DR30 Value DR30 Value DR31 DIF (16 bit Int.
  • Page 36 DR37 DIFE (Extension) DR37 DIFE (Storagenumber 32) DR37 VIF (Date Type G) DR37 Value DR37 Value DR38 DIF (32 bit Int. + max Val. + Extension) DR38 DIFE (Extension) DR38 DIFE (Storagenumber 32) DR38 VIF (Volume flow [l/h]) DR38 Value DR38 Value DR38...
  • Page 37 DR44 DIFE (Extension) DR44 DIFE (Storagenumber 35) DR44 VIF (Volume flow [l/h]) DR44 Value DR44 Value DR44 Value DR44 Value DR45 DIF (16 bit Int. + max Val. + Extension) DR45 DIFE (Extension) DR45 DIFE (Storagenumber 36) DR45 VIF (Date Type G) DR45 Value DR45...
  • Page 38 DR50 Value DR51 DIF (16 bit Int. + max Val. + Extension) DR51 DIFE (Extension) DR51 DIFE (Storagenumber 39) DR51 VIF (Date Type G) DR51 Value DR51 Value DR52 DIF (32 bit Int. + max Val. + Extension) DR52 DIFE (Extension) DR52 DIFE (Storagenumber 39) DR52...

Table of Contents