Kenwood NX-700 Service Manual page 2

Vhf digital transceiver

Hide thumbs Also See for NX-700:

NX-700/700H

CONTENTS

PARTS LIST ........................................................................................ 3

ADJUSTMENT .................................................................................. 19

PC BOARD

TX-RX UNIT (X57-8890-XX) ........................................................... 20

BLOCK DIAGRAM ............................................................................ 26

APPENDIX (SCHEMATIC DIAGRAM X57-8890-XX)

Document Copyrights

rights reserved.

No part of this manual may be reproduced, translated,

distributed, or transmitted in any form or by any means, elec-

tronic, mechanical, photocopying, recording, or otherwise,

for any purpose without the prior written permission of JVC

KENWOOD Corporation.

Firmware Copyrights

The title to and ownership of copyrights for firmware em-

bedded in KENWOOD product memories are reserved for

JVC KENWOOD Corporation. Any modifying, reverse engi-

neering, copy, reproducing or disclosing on an Internet web-

site of the firmware is strictly prohibited without prior written

consent of JVC KENWOOD Corporation. Furthermore,

any reselling, assigning or transferring of the firmware is

also strictly prohibited without embedding the firmware in

KENWOOD product memories.

Transceivers containing AMBE+2™ Vocoder:

The AMBE+2™ voice coding technology is embedded in

the firmware under the license of Digital Voice Systems, Inc.

Disclaimer

While every precaution has been taken in the preparation

of this manual, JVC KENWOOD Corporation assumes no

responsibility for errors or omissions. Neither is any liability

assumed for damages resulting from the use of the informa-

tion contained herein. JVC KENWOOD Corporation reserves

the right to make changes to any products herein at any time

for improvement purposes.

Nx-700h