Jump Settings
J
S
controls the actions of the Jump button (see Figure 102 ). You can also
UMP
ETTINGS
access the J
S
UMP
ETTINGS
Two Jump setting options are available, T
currently-selected option.
The T
option sets the Jump button to provide a traffi c report for a selected city,
RAFFIC
while the J
S
option assigns any channel to the Jump button.
UMP
ET
T
RAFFIC
1.
Highlight and select the T
Figure 103 ). Highlight and select the desired city.
2.
If the ST5 has not yet updated the city list it will display a message indicating that
the city list is updating (see Figure 104 ). Wait 10 minutes and then try again.
100
Menu Options
screen by pressing and holding the Jump button.
Figure 102
RAFFIC
option. The T
RAFFIC
Figure 103
Figure 104
and J
S
. The Jump icon indicates the
UMP
ET
M
screen will appear (see
RAFFIC
ARKET