CoreSense
controller
™
LED descriptions
LED
Status
ON
1
Flashing
ON
2
Flashing
ON
ON
ON
Flashing
Keyboard descriptions - single button
Set
Start
Reset
Up
Down
Service
Defrost
Description
Compressor1 is running
Compressor1 is ready to start
Reserved
Reserved
Condensing fan is running
Reserved
Display with °C
Programmable mode
Display target set point; In programming mode, select a parameter or confirm an
Hold for 5 seconds to reset any lockouts if the current state of the controller allows for it to be
reset.
Enter the fast access menu; In programming mode, browse the parameter codes or increases
the displayed value.
In programming mode it browses the parameter codes or decreases the displayed value.
Enter the service and alarm menu.
Hold for 3 seconds to start a manual defrost or terminate an active defrost.
(Not available at the moment).
LED
Status
ON
Browsing the service menu
Flashing
Browsing the fast access menu
ON
!
Flashing
!
ON
ON
-
Description
A new alarm happened
Browsing the alarm menu
An alarm is occurring
Reserved
Reserved
operation.
13