Starting Engine - Yamaha F225 Owner's Manual

Operation
EMU27495

Starting engine

EWM01601
WARNING
Before starting the engine, make sure
that the boat is tightly moored and that
you can steer clear of any obstructions.
Be sure there are no swimmers in the wa-
ter near you.
EMU41791
Start-up checks
Place the control lever in neutral and turn the
main switch to "
alert-indicator comes on. If the buzzer
sounds and the water separator-alert indica-
tor blinks, consult your Yamaha dealer im-
mediately.
EMU41904
Procedure for starting engine
EWM01842
WARNING
Failure to attach the engine shut-off

cord could result in a runaway boat if
operator is ejected. Attach the engine
shut-off cord to a secure place on your
clothing, or your arm or leg while oper-
ating. Do not attach the cord to clothing
that could tear loose. Do not route the
cord where it could become entangled,
preventing it from functioning.
Avoid accidentally pulling the cord dur-

ing normal operation. Loss of engine
power means the loss of most steering
control. Also, without engine power,
the boat could slow rapidly. This could
cause people and objects in the boat to
be thrown forward.
1. Place the control lever in neutral.
62
" (on). Make sure that no
TIP:
The start-in-gear protection device prevents
the engine from starting except when in neu-
tral.
2. Attach the engine shut-off cord to a se-
cure place on your clothing, or your arm
or leg. Then install the clip on the other
end of the cord into the engine shut-off
switch.
3. Turn the main switch to "
make sure that the digital electronic con-
trol-active indicator lights. The engine
can not be started when the digital elec-
tronic control-alert indicator lights.
N
ZMU05829
ZMU07167
" (on) to