(Iii) Slicing Blades • Shredding Blades • Julienne Blade; (Iv) Citrus Press - Panasonic MK-F800 Operating Instructions Manual

FOOD PROCESSOR
Assembly of Food Processor Attachments
Slicing Blades (Thick / Thin) · Shredding Blades (Coarse / Fine) · Julienne Blade
1
Projected Detent
Fit the projected detent of the desired blade onto the
Blade Stand and ensure it is seated properly.
Note:
• Beware of the sharp edges on the blades while inserting into the Blade Stand.
• To remove the blade, turn over the Blade Stand and push down on the reverse side of the dimple on the
blade.
3
Insert finger and thumb into the finger holes to grip the
Blade Stand. Place the assembled Blade Stand into the
Bowl.
Note:
Ensure that the Drive Shaft is
protruding from the Blade Stand after
insertion.
Citrus Press
1
1
Place the Citrus Strainer onto the Bowl. Turn it
clockwise until a 'click' sound is heard.
10
-DISASSEMBLY & ASSEMBLY-
PUSH
2
2
Finger Holes
Push down on the dimple on the blade as seen above
until a 'snap' sound is heard.
4
1
Place the Bowl Lid on top of the Bowl and turn it
clockwise until a 'click' sound is heard.
2
Attach the Citrus Cone onto the Drive Shaft.
2