Roland LX708 Owner's Manual page 9

Saving current settings into a registration
NOTE
When you save a registration into a location, it will overwrite any
registration already stored at that location.
1.
While holding down the [Registration] button,
press a button from [1] to [4] to select a registration
and then turn the [ ] knob to select a registration
variation.
2.
Rename the registration.
Select the character
which you want to Turn the [ ] knob
change
Press the [ ] knob (confirm)
/
Change the character Turn the [ ] knob (change the character)
/
Press the [ ] knob (back)
Insert one character
Press the [s] button
Delete one character
Press the [7] button
If you decide to cancel, press the [ ] button.
Turn the [ ] knob to select the ( at the right
3.
edge of the screen, and then press the [ ] knob to
confirm.
The registration is saved.
NOTE
Never turn off the power while the screen indicates "Executing... "
Saving a registration set (Registration Export)
You can save all registrations held in registration memory into a
registration set on a USB flash drive.
1.
Connect your USB flash drive to the USB Memory
port.
* Never turn off the power or disconnect a USB flash drive or the
power cord while the USB flash drive access indicator is blinking.
2.
Press the [ ] button.
The [ ] button is lit, and the piano is in function mode.
3.
Turn the [ ] knob to access the "Registration
Export" screen.
4.
Press the [ ] knob to confirm.
The Registration Export screen appears.
5.
Rename the registration set.
Select the character
which you want to
Turn the [ ] knob
change
Press the [ ] knob (confirm)
/
Change the character Turn the [ ] knob (change the character)
/
Press the [ ] knob (back)
Insert one character
Press the [s] button
Delete one character
Press the [7] button
If you decide to cancel, press the [ ] button.
Turn the [ ] knob to select the ( at the right
6.
edge of the screen, and then press the [ ] knob to
confirm.
The settings are saved.
NOTE
Never turn off the power while the screen indicates "Executing... "
7.
To exit Function mode, press the [ ] button.
The [ ] button goes dark.
Loading a saved registration set (Registration Import)
Here's how a registration set that's saved on a USB flash drive can be
loaded into the [Registration] button.
NOTE
When you load a registration set, the registrations that were saved
in the [Registration] button are overwritten and lost. If you don't
want to lose these registrations, save them to a USB flash drive.
1.
Connect your USB flash drive to the USB Memory
port.
2.
Press the [ ] button.
The [ ] button is lit, and the piano is in function mode.
3.
Turn the [ ] knob to access the "Registration
Import," screen.
4.
Press the [ ] knob to confirm.
The Registration Import screen appears.
5.
Turn the [ ] knob to select the registration set that
you want to load.
6.
Press the [ ] knob.
A confirmation message appears.
If you decide to cancel, press the [ ] button.
7.
Turn the [ ] knob to select "Yes," and then press the
[ ] knob.
The settings are loaded.
NOTE
Never turn off the power while the screen indicates "Executing... "
8.
To exit Function mode, press the [ ] button.
The [ ] button goes dark.
Performing
9