Power Smart Features - Samsung AMxxxNN1PEH Series User Manual

Power Smart Features

Operating temperature and humidity
When using the air conditioner follow the operating temperature and humidity ranges.
Mode
Cool mode
Depending on the outdoor
Heat mode
Dry mode
CAUTION
• If you use the air conditioner at a relative humidity above 80%, it may cause a formation of
condensation and a leakage of water on the floor.
• The rated heating capacity is based on an outdoor temperature of 7°C. If the outdoor temperature
goes down below 0°C, heating efficiencies may decrease depending on the temperature
conditions.
• If the indoor unit is out of the operating temperature and humidity range, the safery device may
operate and the air conditioner may stops.
Pairing an indoor unit with a remote control
When using multiple indoor unit, you can control individually pairing remote control and indoor unit.
Set by remote control when the indoor unit is off.
Zone 1~4
NOTE
• After push the
• Each indoor unit number setting must be set by the installer when installing. Contact service
centre to reset indoor unit number.
12
English
Outdoor temperature
unit specifications
, have to push within 60 seconds.
Indoor temperature
18°C to 32°C
30°C or less
18°C to 32°C
Indoor humidity
80% or less
-