Installation Tools - 3Com Switch 7700 Installation Manual

Hide thumbs Also See for Switch 7700:

Table of Contents

Figure 14 Switch 7700 placement

4.3. Installation Tools

Table 24 provides a list of the tools you need to install the Switch 7700.

Table 24 Required installation tools

General tools

Special tools

Instruments

P R E P A R I N G

Measure and

Long tape, ruler (of 1 meter), gradienter, marking pen, powder marker

lineation tools

and pencil

Drills

A percussion drill, several auxiliary drill bits, a vacuum cleaner

Flat-blade screwdriver P4-75mm

Phillips screwdriver P1-100mm, P2-150mm and P3-250mm

Fastening tools

Socket wrench M5

Box-end wrench M6

Box-end wrenches (10-12) or open-end wrench (10-12)

Sharp-nose pliers, diagonal pliers, vices, hand-held electric drill, file,

Small tools

handsaw, crowbar and rubber hammer

Anti-static wrist strap, cable stripper, crimping pliers, RJ-45 crimping pliers and wire punchdown

tool

Multimeter, 500V Meg-ohmmeter (used to measure the insulation resistance), error detector,

optical power meter and earth resistance tester

F O R

I N S T A L L A T I O N

Table of Contents