Icom IC-F1020 Instruction Manual page 6

3
1
PANEL DESCRIPTION
BANK SELECT KEY
1
BK
s
1
Sets the
[CH UP]
and
[CH ON]
keys as bank up/down
keys.
• Push this key, then push the [CH
UP]
or [CH
DN]
to select
the desired bank .
• When the optional UT-105 is installed, push one or more
times to select a channel bank for conventional channels
or SmarTrunk Il™ channels while pushing [BK 5].
OPERATING CHANNEL KEYS
1
CH 1
1
Select an operating channel directly without the
[CH
1
CH 2
1
UP]
and
[CH ON]
keys.
I
CH
31
I
CH41
SCAN START/STOP KEY
1
SCAN
1
Push this key to start scanning; and push again to
stop.
~ NOTE: Hung the microphone to the microphone
~
hanger to operate scanning. When release the
~
microphone, scan will be canceled.
Push and hold this key to indicate the scan group,
then push
[CH UP]
Dr
[CH ON]
to select the desired
group.
SCAN TAG KEY
I
TAG
1
Adds or deletes the selected channel to the scan
group.
• " - " appears above the [TAG] key when the channel be-
longs to the scan group.
PRIORITY CHANNEL KEY
I
PRI A
1
Selects a priority A or priority B chan nel with each
I
PRI B
1
push.
LOCK KEY
I
LOCK
1
Electronically locks all programmable keys except
the [MONI] and [EMER] keys.
MONITOR KEY
I
MONI
I
Activates the following functions on each channel in-
dependently:
• Push and hold the key to unmute the channel (audio is
emitted).
• Push the key to toggle the monitor function ON and OFF
(or ON only or OFF only depending on the pre-setting).
OUTPUT POWER SELECTION KEY
1
HIGH
I
Selects the transmit output power temporarily or per-
manently depending on the pre-setting.
1LOW1
I •
Ask your dealer or system operator for the output power
1LOW21
level for each selection.