Belkin SURF N 15 N150 User Manual page 5

gETTing sTaRTED
1 . connect your router's ethernet cable to your modem's ethernet
port (on the back of your modem) . this port might be labeled
differently on your particular modem . if you are adding a
router for the first time, this port may be connected to your
computer by an ethernet cable . it is OK to disconnect your
computer and plug the router into the modem instead .
2 . Plug the router's power supply into a wall outlet .
3 . Put the cD into your computer . if the cD doesn't
open automatically, please browse to your cD drive
and double-click on the Belkin setup cD icon .
Setup
4 . click the setup icon on the cD menu .
5