Belkin Range Extender/ Access Point User Manual page 53

Troubleshooting Troubleshooting
Note:
Select "WPA (with radius server)" if you are using this
computer to connect to a corporate network that supports an
authentication server such as a radius server. Please consult your
network administrator for further information.
5.
Select "TKIP" or "AES" under "Date Encryption". This setting will
have to be identical to the wireless router (or access point) that
you set up.
6.
Type in your encryption key in the "Network Key" box.
Important:
Enter your pre-shared key. This can be from eight to 63
characters and can be letters, numbers, or symbols. This same key
must be used on all of the clients that you set up.
7.
Click "OK" to apply settings.
What's the difference between 802.11b, 802.11g, 802.11a, and
802.11n?
Currently there are four levels of wireless networking standards, which
transmit data at very different maximum speeds. Each is based on
the designation 802.11(x), so named by the IEEE, the board that is
responsible for certifying networking standards. The most common
wireless networking standard, 802.11b, transmits information at
11Mbps; 802.11a and 802.11g work at 54Mbps; and G Plus MIMO and
Pre-N work at 108Mbps, which utilizes MIMO (Multiple Input Multiple
Output) technology from the 802.11n proposals, to enhance 802.11g
networks. See the following chart for more detailed information.
50 50