Messages; A Message Is Being Displayed; Displaying The Error Memory - VDO MTCO 1324 Operating Instructions Manual

Messages

The MTCO 1324 monitors the functioning of
the system and automatically signals any
failure occurring in one of the components,
the device or the handling. Messages and
notes may be shown in the display immedi-
ately after having closed the drawer or
when the failure occurs.

A message is being displayed

1
• The function monitor
cating instrument or E-Tacho is lit up,
• an exclamation mark (2) will appear next
to the total kilometre reading in the
MTCO 1324 display and ...
• depending on the error type either the
complete time display (3) is flashing or
the colon between the digits will stop to
flash.
• Additionally, the error is recorded in an
electronical memory, ➥ see "Displaying
the error memory".
• Some failures are also documented by
the MTCO 1324 on the chart, ➥ see
page 21.
14
3
2
(1) at the indi-

Displaying the error memory

To find out the reason for the error message
please refer to the ERROR MEMORY
menu.
The display ERROR MEMORY
function may only be selected if the
vehicle is at a standstill!
= Depress key shortly
= Depress key for a longer interval
1. Select the ERROR MEMORY menu by
shortly depressing the
2. Via
or , other active errors may
be displayed.
Symbol with error code
Other error messages available
3. Call up the basic display again,
Depress
–
seconds
or do not depress any key for 20
–
seconds.
key twice.
Error start
key for more than 2
Kienzle MTCO 1324