Summary of Contents for Mitel Voice Switch ST series
Page 1
ST Voice Switch Wall Mount Bracket Kit Quick Install Guide Mitel Networks Corporation 350 Legget Dr. Kanata, Ontario K2K 2W7 Canada +1.844.937.6483...
Page 2
The ST Voice Switch Wall Mount Bracket is an accessory that is used to mount one half- width Mitel ST Voice Switch on a wall. The front of the voice switch will face to the right when mounted on the wall. This wall mount bracket is designed for use with the following devices: •...
Page 3
Preparing the Installation Surface 444 mm (17 - 1/2 ”) 222 mm (8 - 3/4 ”) 54 mm (2 - 1/8 ”) 355 mm (14 ”) 51 mm (2 ”) 317 mm 63 mm 63 mm (12 - 1/2 ”) (2 - 1/2 ”) (2 - 1/2 ”) Preparing Drywall for ST Voice Switch Wall Mount Bracket...
Page 4
2. Align the slots on the left side of the Mitel Voice Switch with the tabs on the bracket, slide the Mitel Voice Switch slots onto the tabs on the bracket, and then rotate the Mitel Voice Switch into the bracket.
Page 5
Wandmontageträgers an einer Sperrholzplatte. Der ST Voice Switch-Wandmontageträger Der ST Voice Switch-Wandmontageträger ist ein Zubehörteil, mit dem Sie einen Mitel ST Voice Switch halber Baugröße an einer Wand befestigen können. Die Vorderseite des Voice Switch zeigt nach rechts, wenn das Gerät an der Wand befestigt ist. Dieser Wandmontageträger kann mit den folgenden Geräten verwendet werden:...