Removing The Memory Modules; Prerequisites; Procedure - Alienware Area-51 Threadripper Edition R7 Service Manual

Removing the memory modules

WARNING: Before working inside your computer, read the safety information that shipped with your computer and
follow the steps in
in After working inside your
www.dell.com/regulatory_compliance.

Prerequisites

1 Remove the stability
2 Remove the left and right side-panels. See

Procedure

1 Lay the chassis on the right side.
2 Locate the memory modules on the system board.
3 Push the securing clip away from the memory module.
4 Remove the memory module from the memory-module slot.
NOTE: Repeat step 2 to step 4 to remove any other memory modules installed in your computer.
56
Before working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
foot.
"Removing the side
computer. After working inside your computer, follow the instructions
panels".