Reference Manual
00809-0100-4840, Rev CB
F.4.24
Preambles (D964)
Fast Keys
This is read by a HART Master Device e.g. a Rosemount 3490 Series Control Unit to determine
how many preamble bytes are to be sent with each HART protocol message.
Field Communicator or AMS Device Manager
To view the number of preamble bytes
1.
2.
3.
4.
5.
6.
Rosemount 3490 Series Control Unit
To view the number of preamble bytes
1.
2.
3.
4.
5.
6.
7.
Programming the 3102 and 3105 using HART
2, 2, 4 [or 5], 2, 2
From the Home screen, select 2: Configure.
Select 2: Manual Setup.
Select 4: HART/Identity (3105) or
5: HART/Identity (3102).
Select 2: Communication.
Select 2: Preambles D964.
When finished, select EXIT to exit to the previous menu.
From the Main Menu screen, select SETUP.
Select the transmitter (e.g. "Tx1: 3102").
Select SYSTEM.
Select FIXED.
Select HART.
Select Num Req Preams.
When finished, use the ESC key to exit to the previous menu.
Appendix F: Programming the 3102 and 3105 using HART
February 2015
Preambles D964
5
HELP
(Field Communicator Screen Shown)
Num Req Preams D964
5
(Rosemount 3491 Screen Shown)
EXIT
217