Navigation System - PEUGEOT 206 Manual

56
THE SATELLITE

NAVIGATION SYSTEM

Introduction
The satellite navigation
guides you to the destination of your
choice by means of vocal and visual
instructions.
The heart of the system lies in the
use of a map database and a GPS
system. The latter enables your
position to be located by means of
several satellites.
The satellite navigation system con-
sists of the following components:
– the remote control,
– the display,
– the control unit,
– the last voice message recall
control,
– the CD ROM,
– the multifunction aerial.
Some functions
described may vary depending on
the CD-ROM version or the country
where the vehicle is sold.
26-05-2003
YOUR 206 IN DETAIL
The remote control
Pointing this at the screen enables the information contained in the various
menus to be selected.
system
or services
A special compartment in the glove box permits storage of the remote control.
Direction arrows:
These enable you to move around the screen and
thus select a function.
On the welcome screen only, the up and down
arrows enable the brightness of the screen to be
adjusted.
The right and left arrows enable the complete
name of the road to be displayed temporarily,
during guidance, if the name exceeds the capacity
of the screen.
menu : this button allows access to the main menu. It can
be used at any time.
esc : escape button
"Short press": cancels the current operation and
returns to the previous screen.
"Press for more than 2 seconds": returns to the wel-
come screen.
This button can be used in any menu. It is inactive
during guidance.
mod : mode button
"Short press": changes between date, navigation,
radio and permanent locating.
val : Validation button
Confirms the function selected.
Reference of the 2 batteries: 1.5 volts type LR03.