Table of Contents
Advertisement
Alternate Setup Method
Setting your Connection Type if you are a Telstra ® BigPond User
[Australia Only] Your user name and password are provided to you by
Telstra BigPond. Enter this information below. Choosing your state
from the drop-down menu (1) will automatically fill in your login server
IP address. If your login server address is different than one provided
here, you may manually enter the login server IP address by placing a
check in the box next to "User decide login server manually" (4) and
type in the address next to "Login Server" (5). When you have entered
all of your information, click "Apply Changes" (7). After you apply the
changes, the Internet Status indicator will read "connection OK" if
your Router is set up properly.
(1)
(2)
(3)
(4)
(5)
1.
Select your State
Select your state from the drop-down menu (1). The "Login
Server" box will automatically be filled in with an IP address.
If for some reason this address does not match the address
that Telstra has given, you can manually enter the login server
address. See "User Decide Login Server Manually" (4).
2.
User Name
Provided by your ISP. Type in your user name here.
48
(7)
Advertisement
Table of Contents
