Page 2
DENSO WAVE; (ii) The use of DENSO WAVE’s products in a manner for which the same were not intended nor designed; or (iii) The modification of DENSO WAVE’s products by other(s) than DENSO WAVE.
HIGH FREQUENCY 13.56MHz TRANSCEIVER overholder de væsentlige krav og øvrige relevante krav i direktiv 1999/5/EF. [DE] Hiermit erklärt DENSO WAVE INCORPORATED, dass sich das Gerät HIGH German FREQUENCY 13.56MHz TRANSCEIVER in Übereinstimmung mit den grundlegenden Anforderungen und den übrigen einschlägigen Bestimmungen der Richtlinie 1999/5/EG befindet.
Page 4
FREQUENCY 13.56MHz TRANSCEIVER típusú beren-dezés teljesíti az alapvető követelményeket és más 1999/5/EK irányelvben meghatározott vonatkozó rendelkezéseket. [NL] Hierbij verklaart DENSO WAVE INCORPORATED dat het toestel l HIGH Dutch FREQUENCY 13.56MHz TRANSCEIVER in overeenstemming is met de essentiële eisen en de andere relevante bepalin-gen van richtlijn 1999/5/EG.
Page 5
FCC and IC Regulations (For North America) ■NOTICE This device complies with Part 15 of FCC Rules and Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference. (2) this device must accept any interference, including interference that may cause undesired operation of this device.
Page 7
Several current reports indicate that RFID devices may cause malfunctions in AIMDs such as implantable cardiac pacemakers, implantable cardioverter-defibrillator. This is attributed to general characteristics of electric or electronic devices using radio waves, and not the unique features of DENSO WAVE’s products or this product itself. - 7 -...
Page 8
To System Designers When introducing the product in those systems that affect human lives, develop applications carefully through redundancy and safety design which avoids the feasibility of affecting human lives even if a data error occurs. Installation Do not use the product in places where use of radio waves is restricted, such as on airplanes or in hospitals.
Page 9
CAUTION Operating environments and Installation Never put the product in places where there are excessively high temperatures, such as inside closed-up automobiles, in places exposed to direct sunlight, or in places generating heat accumulation caused by radiant, etc. Doing so could affect the parts, resulting in a fire. Avoid using the product in extremely humid, dusty areas or, where there are drastic temperature changes.
Page 10
Specification Item Specification Supply Voltage 5 V DC (From the USB connector of the host controller) Current Consumption 0.5 A (at 5 V DC) Oscillating Frequency MAIN:20 MHz (PLL:120MHz),RF:13.56 MHz Operating temperature range -0 to 40ºC (freezing not allowed) Operating humidity range 35% to 95%RH (condensation not allowed) Storage temperature range...
Page 11
External dimensions (Unit: mm [inch]) Standard Tolerance Nominal Dimension (L) Tolerance Weight: Approx. 150 g L 18 [0.71] 1.2[0.047] 18 L 30[1.18] 1.5[0.059] 30 L 50 [1.97] 2.3[0.091] 50 L 80 [3.15] 3.0[0.118] 80 ...