Belkin F5D5231-4 User Manual page 57

USING THE WEB-BASED ADVANCED USER INTERFACE
Changing System Settings
The "System Settings" page is where you can enter a new administrator password,
set the time zone, enable remote management, and turn on and off the NAT
function of the Router.
Setting or Changing the Administrator Password
The Router ships with NO password entered. If you wish to add a password for
greater security, you can set a password here. Write down your password and keep
it in a safe place, as you will need it if you need to log into the Router in the
future. It is also recommended that you set a password if you plan to use the
remote management feature of your Router.
Changing the Login Timeout Setting
The login timeout option allows you to set the period of time that you can be
logged into the Router's advanced setup interface. The timer starts when there has
been no activity. For example, you have made some changes in the advanced setup
interface, then left your computer alone without clicking "Logout". Assuming the
timeout is set to 10 minutes, then 10 minutes after you leave, the login session will
expire. You will have to login to the Router again to make any more changes. The
login timeout option is for security purposes and the default is set to 10 minutes.
NOTE: Only one computer can be logged into the Router's advanced setup interface at
one time.
55