Belkin F5D5231-4 User Manual page 43

USING THE WEB-BASED ADVANCED USER INTERFACE
Setting MAC Address Filtering
The MAC address filter is a powerful security feature that allows you to specify
which computers are allowed on the network. Any computer attempting to access
the network that is not specified in the filter list will be denied access. When you
enable this feature, you must enter the MAC address of each client (computer) on
your network to allow network access to each. The "Block" feature lets you turn on
and off access to the network easily for any computer without having to add and
remove the computer's MAC address from the list.
To enable this feature, select "Enable MAC Address Filtering" (1). Next, enter the
MAC address of each computer on your network by clicking in the space provided
(2) and entering the MAC address of the computer you want to add to the list. Click
"Add" (3), then "Apply Changes" to save the settings. To delete a MAC address from
the list, simply click "Delete" next to the MAC address you wish to delete. Click
"Apply Changes" to save the settings.
NOTE: You will not be able to delete the MAC address of the computer you are using
to access the Router's administrative functions (the computer you are using now).
41
(1)
(2)
(3)