Tones/Alerts - Siemens M55 User Manual

M55 Barracuda fug am, A31008-H6300-A40-1-4A19 (20. May 2003, 16:01)
74

Tones/Alerts

KmK
§Menu§ Tones/Alerts
K
Select function.
You can set the tones to match your
needs.
Ringer setting
Activate/deactivate all
On/Off
tones.
Beep Reduce ringtone to a
short signal (beep).
Additional information
k
Display: Beep.
j
Display: Ringer off.
Switch off ringer .............................. p. 115
Vibrating alert
To avoid the disturbance caused by a
ringing phone, you can activate the
silent alert function as an
alternative. The silent alert can also
be activated in addition to the ringer
(e.g. in noisy environments). This
function is deactivated when the
battery is charged.
The silent alert is activated
automatically if the highest volume
is set for the ringtone. This is to
remind you not to hold the phone to
your ear when ringing in order to avoid
damaging your hearing.
m Setup
Volume
Set different volumes for types of
call/functions.
G
§Select§
G
§OK§
Incoming call
You can assign different volumes to
Calls,
d
in the Addressbook.
Additional information
Please make sure you have accepted the
call before holding the phone to your ear.
This will avoid damage to your hearing from
loud ringtones!
If two independent phone numbers are
registered on your phone, you can set
different volumes for them (p. 121).
Select:
Incoming call (see below)
Alarm
Alarm clock
Messages
Cell broadcast
Startmelody
End melody
Applications
Press. The ringtone is
played.
Set volume.
Confirm.
and each group
Other calls: