Installation Guidelines - Elation PROTRON ECLYPSE User Manual

I N S T A L L A T I O N G U I D E L I N E S
IPX4 RATED
An IP rated lighting fixture is one, which is commonly installed in outdoor environments and
has been designed with an enclosure that effectively protects the ingress (entry) of external
foreign objects such as dust and water. The International Protection (IP) rating system is
commonly expressed as "IP" (Ingress Protection) followed by two numbers (i.e. IP20)
where the numbers define the degree of protection. The first digit (Foreign Bodies
Protection) indicates the extent of protection against particles entering the fixture and the
second digit (Water Protection) indicates the extent of protection against water entering the
fixture.
An IPX4 rated lighting fixture designed for temporary outdoor environments which has NOT
been tested to protect against the ingress of dust (X) but has been tested to protect from
splash of water in any direction (4).
PERMANENT OUTDOOR AND/OR MARINE/COSTAL INSTALLATIONS
Please note although this fixture is IP rated, this fixture is NOT suitable for permanent
outdoor and/or marine environment installations. Installing this fixture in permanent outdoor
and/or marine environment installation may cause corrosion and/or excessive wear to the
interior and/or exterior components of the fixture. Damages and/or performance issues
resulting from installation in a permanent outdoor and/or marine environment installation
will void the manufactures warranty and will NOT be subject to any warranty claims and/or
repairs.
FLAMMABLE MATERIAL WARNING
Keep fixture minimum 5.0 feet (1.5m) away from flammable materials and/or pyrotechnics.
ELECTRICAL CONNECTIONS
A qualified electrician should be used for all electrical connections and/or installations.
ENSURE ALL CONNECTIONS AND END CAPS ARE PROPERLY SEALED WITH
A NON-CONDUCTIVE
ELECTRICAL SUPPLIERS) TO PREVENT WATER INGRESS/CONDENSATION
AND/OR CORROSION.
USE CAUTION WHEN POWER LINKING OTHER MODEL FIXTURES AS THE
POWER CONSUMPTION OF OTHER MODEL FIXTURES MAY EXCEED THE MAX
POWER OUTPUT ON THIS FIXTURE. CHECK SILK SCREEN FOR MAX AMPS.
DIELECTRIC GREASE
10
(AVAILABLE AT MOST