Chicago Electric 90672 Assembly And Operating Instructions Manual page 6

LEAD
WIRE
PLUG (19)
BATTERY CLAMPS (27)
LEAD WIRE
PLUG (19)
5. Remove the vehicle's spare tire and set it aside.
6. Use the vehicle's jack to raise the vehicle. CAUTION! Refer to the
vehicle manufacturer's owner's manual for instructions on using the
jack and to determine the proper lifting points on the vehicle. Always
chock the opposite wheel.
7. If necessary, remove the wheel's hubcap to expose the wheel lug
nuts.
8. Make sure the Impact Wrench is off. Then, depress the Forward/
Reverse Switch (16) to its Reverse position (counterclockwise
rotation).
SKU 90672
90672.p65
BLACK NEGATIVE (-) CLAMP
TO NEGATIVE (-) BATTERY TERMINAL
RED POSITIVE (+) CLAMP
TO POSITIVE (+) BATTERY
TERMINAL
(See Figure D, next page.)
PAGE 6
6
FIGURE B
CIGARETTE
LIGHTER
RECEPTACLE
FIGURE C
11/20/03, 11:13 AM