Using Control Panel Menus; Accessing Control Panel Menus - Xerox Phaser 6100 User Manual

Using Control Panel Menus

A number of menus are available to make it easy for you to
change the printer settings. The diagram on page 5.6 shows the
menus and all of the items available in each menu. The items in
each menu and the options you can select are described in more
detail in the tables beginning on page 5.6.

Accessing Control Panel Menus

You can configure your printer from the printer's control panel.
You can also use the control panel menus while the printer is in
use.
1
In ready mode press the Menu button (
the menu you want on the bottom line of the display.
2
Press the OK button (
3
Press the scroll button (
want displays on the bottom line.
4
Press the OK button (
5
If the menu item has submenus, repeat steps 3 and 4.
6
Press the scroll button (
you want displays on the bottom line or enter the required
value.
7
Press the OK button (
An asterisk ( ) appears next to the selection on the display,
*
indicating that it is now the default.
8
To exit the menu, press the Back button (
the Cancel button (
After 60 seconds of inactivity (no key has been pressed),
the printer automatically returns to ready mode.
N
: Print settings made from the printer driver override the
OTE
settings on the control panel.
) until you see
) to access the menu.
or ) until the menu item you
) to confirm the selected item.
or ) until the setting option
) to save your input or selection.
).
U C
SING THE ONTROL
5
) repeatedly, or
P
5.5
ANEL