System Connection - Sharp CD-BH20 Operation Manual

System connection

Make sure to unplug the AC power cord before making any connections.
Installing the AM loop antenna
< Assembling > < Attaching to the wall >
wall
Screws (not supplied)
AC outlet
(AC 100 - 240 V ~
50/60 Hz)
■ Line In connection
Connect to the TV using an audio cable.
TV
(commercially
Main unit
To select Line In function:
● On main unit: Press INPUT button repeatedly until Line
In is displayed.
● On remote control: Press AUDIO/LINE (INPUT) button
repeatedly until Line In is displayed.
AM loop antenna
To audio output
jacks
Audio cable
available)
To LINE input
jacks
Installing the supplied
FM antenna
CAUTION:
TO PREVENT ELECTRIC SHOCK,
MATCH WIDE BLADE OF PLUG TO
WIDE SLOT, FULLY INSERT.
■ Antenna connection
Supplied FM antenna:
Connect to the FM 75 ohms jack and position it where
reception is best.
External FM antenna:
Use an external FM antenna (75 ohms coaxial cable) for
better reception. Disconnect the supplied FM antenna wire
before use.
Supplied AM loop antenna:
Connect to the AM terminal and position it where reception
is best. Place it on a shelf, etc., or attach it to a stand or a
wall with screws (not supplied).
■ Bluetooth standby mode
● The first time the unit is plugged in, it will enter the
Bluetooth standby mode. "Bluetooth Stby" appears on
the display.
● To cancel the Bluetooth standby mode, press the ECO
button (remote control) during power standby mode.
The unit will enter the low power consumption mode.
● To return to the Bluetooth standby mode, press the ECO
button again.
■ AC power connection
After all connections have been made correctly, plug the
AC power cord into the AC outlet.
Note:
Unplug the AC power cord from the AC outlet if the unit will
not be in use for a prolonged period of time.
E-6
External FM antenna
for better reception (not
supplied)